- GENERAL INFORMATION -
Please follow the steps below:
1) Turn on your WiFi while in the campus and scan for available access points.
2) Login to SSID: "SPStudent"
3) When prompted key in your SPICE account details.
- TROUBLESHOOTING -
For Android uses, you should configure your network connection as per the following:
EAP/Security Method = PEAP
Phase 2 authentication = MSCHAPV2
CA certificate = Unspecified or don't select anything
Identity = Your SPICE ID
Password = Your SPICE Password
For Apple iOS/OS, you should configure your network connection as per the following (if requested to specify):
EAP/Security Method = WPA2 Enterprise
For company issued laptops, please discuss with your company network engineers to allow the network settings to accept/trust new network certificates and configurations.
If this is not possible due to company policy, you may rely on your mobile/tablet device or consider bringing your own personal notebook instead.
- OTHER RESOURCES -
For a complete guide, please refer to the guide below: